ILLUMINATION CONTROL SYSTEM (Illuminated Entry System)
When inspecting the following functions, make sure that the map light switch*1, *2 and No. 1 room light switch are in the door position.
*1: w/ Map Light
*2: w/ Theft Deterrent System
The illuminated entry system has the following control functions:
| Control | Outline | Lighting |
|---|---|---|
| Door Lock/Unlock-linked*2 | When all doors are unlocked using the transmitter, the items listed to the right turn on. | ·
Map light assembly*1 ·
Ignition key cylinder light*4 ·
No. 1 room light assembly |
| When all doors are locked using the transmitter, the items listed to the right turn off. | ||
| Ignition Switch-linked*2 | When the ignition switch is turned from off to ON, the items listed to the right turn off. | ·
Map light assembly*1 ·
Ignition key cylinder light*4 ·
No. 1 room light assembly |
| Door Open/Close-linked*2 | When any door is opened, the items listed to the right turn on. | ·
Map light assembly*1 ·
Ignition key cylinder light*4 ·
No. 1 room light assembly |
| When all doors are closed, the items listed to the right turn off. | ||
| Door Open/Close-linked*3 | When any door is opened, the items listed to the right turn on. | No. 1 room light assembly |
| When all doors are closed, the items listed to the right turn off. |
*1: w/ Map Light
*2: w/ Theft Deterrent System
*3: w/o Theft Deterrent System
*4: w/ Ignition Key Cylinder Light