Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM1840EF _58 Vehicle Interior _009642 LIGHTING (INT) _0052701 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 1.INSPECT TRANSPONDER KEY AMPLIFIER

a.
E074066
0.302,0.083 0.635,0.406 0.333,0.323 10 *a
*a Component without harness connected (Transponder Key Amplifier)


Apply battery voltage to the connector and check the LED illumination.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 6
LED illuminates


If the result is not as specified, replace the transponder key amplifier.