Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY › 2011.10–2012.01
RM1840EF _58 Vehicle Interior _009645 SUPPLEMENTAL RESTRAINT SYSTEMS _0052712 FRONT PASSENGER AIRBAG ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)


b.

With the instrument panel passenger airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag assembly with a new one:

Cuts, minute cracks or marked discoloration on the instrument panel passenger airbag assembly.


Hide 2.CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

With the instrument panel passenger airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag assembly with a new one:

·

Check for cuts, cracks or discoloration on the instrument panel passenger airbag assembly.

·

Check for cracks or other damage on the connector.

·

Check for deformation or cracks on the instrument panel and instrument panel reinforcement.


CAUTION:

For removal and installation of the instrument panel passenger airbag assembly, be sure to follow the correct procedure.