Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat) › from 2012.10
RM1840EF _58 Vehicle Interior _009646 SEAT _0052716 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY

a.

Place the front seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Connect the seat wire connector under the seat.


c.

Connect the cable to the negative (-) battery terminal.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).



d.

Temporarily install the front seat assembly with the 4 bolts.


e.

Operate the power seat switch (slide switch) to move the seat to the rearmost position.


f.
B291599
0.063,1.844 0.417,2.083 0.354,0.24 10 false (1) 0.844,2.625 1.25,2.865 0.406,0.24 10 false (2)

Tighten the bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


g.

Operate the power seat switch (slide switch) to move the seat to the foremost position.


h.
B342787
2.323,1.167 2.781,1.365 0.458,0.198 10 false (1) 1.604,0.792 2.063,0.99 0.458,0.198 10 false (2)

Tighten the bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.INSTALL SEAT TRACK COVER LH

a.
B211321
2.063,1.635 2.313,1.833 0.25,0.198 10 false (1) 0.583,1.583 0.792,1.781 0.208,0.198 10 false (2)

Attach the 2 claws in the order shown in the illustration to install the seat track cover LH.

NOTICE:

Be careful not to damage the claws.



Hide 3.INSTALL INNER SEAT TRACK BRACKET COVER LH

a.
B211322
1.313,1.615 1.583,1.823 0.271,0.208 10 false (1) 2.635,1.635 2.927,1.865 0.292,0.229 10 false (2)

Attach the 2 claws in the order shown in the illustration to install the inner seat track bracket cover LH.

NOTICE:

Be careful not to damage the claws.



Hide 4.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.