Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Separate Seat Type) › 2011.10–2012.10
RM1840EF _58 Vehicle Interior _009646 SEAT _0052717 FRONT SEAT ASSEMBLY(for Separate Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Separate Seat Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

Hide 2.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

Hide 3.REMOVE FRONT SEAT CUSHION COVER LH

a.

Remove the front seat cushion cover LH.


Hide 4.REMOVE FRONT SEAT INNER CUSHION SHIELD LH

B278169
0.927,1.24 1.281,1.51 0.354,0.271 10 false (1) 1.677,0.438 1.969,0.625 0.292,0.188 10 false (2)

a.

Remove the 2 screws.


b.

Detach the 2 hooks in the order shown in the illustration and remove the front seat inner cushion shield LH.


Hide 5.REMOVE VERTICAL SEAT ADJUSTER KNOB LH (w/ Vertical Adjuster)

a.
B278170
2.375,1.583 2.229,1.583 2.229,1.583 1.698,1.24 true 2.396,1.469 2.573,1.656 0.177,0.188 10 false *1
*1 Protective Tape


Using a screwdriver, remove the snap ring as shown in the illustration.

HINT:

Tape the screwdriver tip before use.



b.

Remove the vertical seat adjuster knob LH.


Hide 6.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

a.
B278171
0.25,0.208 0.469,0.208 0.469,0.208 0.854,0.323 true 0.052,0.104 0.219,0.25 0.167,0.146 10 false *1
*1 Protective Tape


Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

HINT:

Tape the screwdriver tip before use.



Hide 7.REMOVE FRONT SEAT CUSHION SHIELD LH

B278172
2.365,0.26 2.229,0.26 true 2.229,0.26 1.948,0.75 true 2.229,0.26 2.427,1.219 true 0.427,0.885 0.594,0.885 0.594,0.885 0.958,1.365 false 2.74,1.333 3.021,1.563 0.281,0.229 10 false (1) 1.75,1.25 2.031,1.458 0.281,0.208 10 false (2) 2.417,0.156 2.615,0.354 0.198,0.198 10 false *1 0.188,0.781 0.365,0.948 0.177,0.167 10 false *2
*1 Hook
*2 Guide


a.

Remove the 2 screws.


b.

Detach the 2 hooks in the order shown in the illustration, and then detach the guide and remove the front seat cushion shield LH.


Hide 8.REMOVE SEATBACK SPRING LH

a.
B277649

Remove the seatback spring LH.


Hide 9.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B290617

for Power Seat, Front Passenger Side:

Remove the hog rings and fold back the separate type front seat cushion cover and rubber bands of the separate type front seatback cover.


b.
B342975

Remove the 4 bolts and front seatback assembly.


c.

Detach the 2 pieces of fastening tape and remove the hog rings, and then roll up the separate type front seatback cover.

B278173
6.031,0.583 6.438,0.24 6.438,0.24 6.625,0.24 true 1.302,0.448 1.771,0.188 1.771,0.188 1.99,0.188 true 6.635,0.146 6.813,0.313 0.177,0.167 10 false *1 2.021,0.094 2.302,0.281 0.281,0.188 10 false *1
*1 Fastening Tape - -



d.
B278174

Remove the hog rings and detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.


e.
B278175

Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.


f.

for Vinyl Seat, for Cloth Seat:

Remove the hog rings and roll up the separate type front seatback cover.

B291592
0.854,0.125 1.146,0.333 0.292,0.208 10 false *A 2.958,0.125 3.24,0.344 0.281,0.219 10 false *B 1.448,1.552 1.688,1.75 0.24,0.198 10 false *a 5.719,1.552 5.979,1.74 0.26,0.188 10 false *b 3.49,1.552 3.698,1.708 0.208,0.156 10 false *a
*A for Vinyl Seat *B for Cloth Seat
*a Front view of front seatback *b Rear view of front seatback



g.

for Leather Seat:

Remove the hog rings and roll up the separate type front seatback cover.

B286717
0.958,0.063 1.167,0.219 0.208,0.156 10 false *A 2.948,0.063 3.156,0.219 0.208,0.156 10 false *B 1.438,1.552 1.646,1.708 0.208,0.156 10 false *a 5.729,1.552 5.938,1.708 0.208,0.156 10 false *b 3.49,1.552 3.698,1.708 0.208,0.156 10 false *a
*A for TASA Made *B for TMT Made
*a Front view of front seatback *b Rear view of front seatback



h.
B207089

Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover.


Hide 10.REMOVE SEPARATE TYPE FRONT SEATBACK PAD

a.
B207090

Remove the separate type front seatback pad.


Hide 11.REMOVE NO. 1 SEATBACK CLOTH (for TASA Made)

a.
B215905

Remove the No. 1 seatback cloth from the separate type front seatback spring assembly.


Hide 12.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B278177

Remove the hog rings and fold back the separate type front seat cushion cover.


b.
B278178

for Front Passenger Side, w/ Seat Belt Warning System:

Detach the wire harness clamp.


c.
B278179

Remove the hog rings.


d.
B278180

Bend the 2 front seat cushion frame claws upward.


e.

Detach the hooks and remove the separate type front seat cushion cover together with the pad from the front seat cushion frame sub-assembly LH.

B278181


f.

Remove the hog rings and separate type front seat cushion cover.

B278516
0.791,0.044 1.025,0.225 0.235,0.181 10 *A 4.378,0.044 4.612,0.225 0.235,0.181 10 *B
*A for Vinyl Seat, for Cloth Seat *B for Leather Seat



Hide 13.REMOVE FRONT SEAT CUSHION PROTECTOR

a.
B276737

Remove the 2 front seat cushion protectors.


Hide 14.REMOVE FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH

a.
B276739

Remove the 4 bolts and front seat cushion frame sub-assembly LH.


Hide 15.REMOVE FRONT SEAT ADJUSTER ROD (w/ Vertical Adjuster)

a.
B276748

Remove the 2 bolts and front seat adjuster rod.


Hide 16.REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH

a.
B278183

B278184

Using a screwdriver, detach the 2 springs and remove the seat track handle sub-assembly LH as shown in the illustration.

HINT:

The seat track handle sub-assembly LH will get caught on the springs when removing it. Detach the springs to remove the seat track handle sub-assembly LH.



Hide 17.REMOVE SEAT SPRING (w/ Vertical Adjuster)

a.

Temporarily install the vertical seat adjuster knob LH.


b.

Turn the vertical seat adjuster knob LH clockwise and move the lower reclining adjuster arm sub-assembly to the uppermost position.


c.

Remove the vertical seat adjuster knob LH.


d.
B278185

Detach the seat spring from the lower reclining adjuster arm sub-assembly.


e.
B278186

Using a screwdriver, spread apart the tabs that hold the spring, and then remove the seat spring.


Hide 18.REMOVE FRONT NO. 2 SEAT ADJUSTER PIN LH (w/ Vertical Adjuster)

a.
B278187

Using a 6 mm socket hexagon wrench, remove the front No. 2 seat adjuster pin LH.


Hide 19.REMOVE VERTICAL ADJUSTING SHAFT SUB-ASSEMBLY (w/ Vertical Adjuster)

a.

Temporarily install the vertical seat adjuster knob LH.


b.
B278188

Turn the vertical seat adjuster knob LH clockwise and move the gear of the vertical adjusting shaft sub-assembly to the position shown in the illustration.


c.

Remove the vertical seat adjuster knob LH.


d.
B278189
0.885,0.135 1.01,0.135 true 1.01,0.135 1.229,0.396 true 0.656,0.052 0.813,0.208 0.156,0.156 10 false *1
*1 Vertical Travel Link


Using a screwdriver, remove the 2 E-rings.


e.

Disconnect the 2 vertical travel links from the vertical adjusting shaft sub-assembly.


f.
B278190

Disconnect the vertical adjusting shaft sub-assembly from the 2 lower reclining adjuster arms and remove the vertical adjusting shaft sub-assembly.


Hide 20.REMOVE LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY LH

a.
B278191

w/ Vertical Adjuster:

Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts and lower reclining adjuster arm sub-assembly LH.


b.
B278192

w/o Vertical Adjuster:

Remove the 3 bolts and lower reclining adjuster arm sub-assembly LH.


Hide 21.REMOVE LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY RH

a.

w/ Vertical Adjuster:

HINT:

Use the same procedure described for the LH side.



b.

w/o Vertical Adjuster:

HINT:

Use the same procedure described for the LH side.



Hide 22.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH

a.
B278193

Remove the front seat cushion edge protector LH.