Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM1840EF _58 Vehicle Interior _009646 SEAT _0052718 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY

a.

Place the front seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Temporarily install the front seat assembly with the 4 bolts.


c.
B291052
2.937,1.451 3.175,1.611 0.238,0.16 10 (1) 2.441,1.797 2.678,1.957 0.238,0.16 10 (2) 0.623,0.708 0.861,0.868 0.238,0.16 10 (3) 0.163,0.966 0.401,1.125 0.238,0.16 10 (4)

Tighten the 4 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.

Pass the inner belt through the hole of the seat cushion.


Hide 2.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.