Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM1840EF _58 Vehicle Interior _009646 SEAT _0052718 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE FRONT SEAT INNER CUSHION SHIELD RH

a.
B278211
1.427,0.698 1.521,0.698 false 1.521,0.698 1.802,1.281 true 0.979,1.823 1.073,1.823 false 1.073,1.823 1.646,1.51 true 2.333,2.021 2.417,2.021 false 2.333,2.021 2.021,1.573 true 1.271,0.604 1.448,0.76 0.177,0.156 10 false *2 0.823,1.719 1,1.875 0.177,0.156 10 false *1 2.438,1.917 2.615,2.073 0.177,0.156 10 false *1
*1 Hook
*2 Guide


Remove the screw.


b.

Detach the 2 hook and guide, and remove the front seat inner cushion shield RH.


Hide 2.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

a.
B112297

Remove the screw and reclining adjuster release handle RH.


Hide 3.REMOVE FRONT SEAT CUSHION SHIELD RH

HINT:

Use the same procedure described for the front seat inner cushion shield RH.


Hide 4.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B112300

Remove the 4 bolts and front seatback assembly.


b.
B278212
2.938,1.438 2.646,1.948 2.646,1.948 1.854,1.854 true 2.646,1.958 2.833,2.125 0.188,0.167 10 false *1
*1 Fastening Tape


Remove the hog rings.


c.

Detach the 2 pieces of fastening tape and roll up the separate type front seatback cover.


d.
B207670

Remove the hog rings and roll up the separate type front seatback cover.


e.
B291050

Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover.


Hide 5.REMOVE SEPARATE TYPE FRONT SEATBACK PAD

a.

Remove the separate type front seatback pad from the separate type front seatback spring assembly.


Hide 6.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B278213

for TASA Made:

Remove the hog rings.


b.
B257803
0.344,2.198 0.292,2.51 false 0.292,2.51 0.375,2.385 false 0.292,2.51 0.781,2.51 false 3.063,0.875 2.594,0.969 false 3.063,0.875 2.688,1.156 false 3.063,0.875 2.823,1.865 false 0.25,0.813 0.729,0.917 false 0.25,0.813 0.5,1.01 false 0.25,0.813 0.5,1.521 false 2.615,2.375 3.198,2.375 false 0.073,2.531 0.229,2.677 0.156,0.146 10 false *1 3.135,0.729 3.292,0.875 0.156,0.146 10 false *2 0.052,0.646 0.208,0.792 0.156,0.146 10 false *2 3.24,2.24 3.427,2.448 0.188,0.208 10 false *2
*1 Hog Ring
*2 Hook


for TMT Made:

Remove the hog rings and detach the hooks.


c.
B277653

Remove the hog rings and separate type front seat cushion cover.


Hide 7.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD

NOTICE:
·

As the separate type front seat cushion pad is affixed to the front seat cushion frame sub-assembly RH, do not remove the separate type front seat cushion pad from the front seat cushion frame sub-assembly RH unless it is necessary to replace the separate type front seat cushion pad. If the separate type front seat cushion pad is removed from the front seat cushion frame sub-assembly RH, make sure to replace the separate type front seat cushion pad.

·

Perform the following only when replacing the separate type front seat cushion pad or front seat cushion frame sub-assembly RH.



a.
B278214
0.333,0.771 0.781,0.771 true 0.167,0.677 0.323,0.823 0.156,0.146 10 false *1
*1 Adhesive Area


Detach the part of the separate type front cushion pad attached with adhesive shown in the illustration, and remove the separate type front seat cushion pad.