Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Double Cab)
RM1840EF _58 Vehicle Interior _009646 SEAT _0052719 REAR SEAT ASSEMBLY(for Double Cab) A

SEAT  REAR SEAT ASSEMBLY(for Double Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.INSTALL REAR SEAT ASSEMBLY

a.

Fold up the rear seat cushion assembly.


b.
B342897
0.438,0.146 1.073,0.146 false 2.521,0.969 2.917,0.969 false 0.885,2.458 1.083,2.875 1.083,2.875 1.281,2.875 true 2.094,3.177 2.333,3.177 2.333,3.177 2.615,2.885 true 0.208,0.052 0.521,0.208 0.313,0.156 10 false *1 1.385,2.771 1.698,2.927 0.313,0.156 10 false *2 2.99,0.865 3.302,1.021 0.313,0.156 10 false *1 1.865,3.063 2.177,3.219 0.313,0.156 10 false *2 0.479,1.646 0.771,1.875 0.292,0.229 10 false (1) 0.26,2.104 0.573,2.333 0.313,0.229 10 false (2) 2.823,2.167 3.281,2.365 0.458,0.198 10 false (3) 3.073,2.531 3.333,2.74 0.26,0.208 10 false (4)
*1 Hook
*2 Guide


Place the rear seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



c.

Attach the 2 hooks and 2 guides.


d.

Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.


e.

Temporarily install the rear seat assembly with the 4 bolts.


f.

Tighten the 4 bolts in the order shown in the illustration.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


g.

Detach the fold seat stopper band from the vehicle body.


h.

Pass the 2 rear No. 1 seat inner belts through the 2 seat cushion rubber bands.

B342898
4.635,3.01 4.635,2.854 false 5.99,3.208 5.99,3.083 false 4.531,3.021 4.844,3.177 0.313,0.156 10 false *1 5.896,3.208 6.208,3.365 0.313,0.156 10 false *1
*1 Seat Cushion Rubber Band - -



i.
B277835
2.979,2.698 2.99,2.729 0.01,0.031 0.823,2.646 1.719,2.646 1.719,2.646 1.719,2.781 false 1.01,2.792 1.01,2.646 false 2.656,2.958 2.99,2.958 2.99,2.958 2.99,2.854 false 2.656,2.625 2.99,2.625 2.99,2.625 2.99,2.74 false 0.594,2.542 0.823,2.708 0.229,0.167 10 false *1 2.438,2.854 2.594,3 0.156,0.146 10 false *1 2.406,2.542 2.563,2.688 0.156,0.146 10 false *1
*1 Fold Seat Stopper Band Button


Return the seat cushion to its original position to lock the seat cushion lock.


j.

Attach the fold seat stopper band button.


Hide 2.INSTALL REAR SEAT HINGE COVER LH

B276875

a.

Attach the guide.


b.

Push the rear seat hinge cover LH to attach the 2 claws and install the rear seat hinge cover LH.


Hide 3.INSTALL REAR SEAT HINGE COVER RH

HINT:

Use the same procedures described for the LH side.