Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Double Cab)
RM1840EF _58 Vehicle Interior _009646 SEAT _0052719 REAR SEAT ASSEMBLY(for Double Cab) A

SEAT  REAR SEAT ASSEMBLY(for Double Cab)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the 2 rear seat headrests.


Hide 2.REMOVE REAR SEAT LEG BRACKET LH

B276884
1.146,0.979 1.354,0.979 1.354,0.979 1.531,1.344 true 0.865,0.885 1.115,1.063 0.25,0.177 10 false *a
*a Washer installed between nut and rear seat leg bracket LH


a.

If the washer is installed between the nut and rear seat leg bracket LH:

Remove the nut, washer and rear seat leg bracket LH.


b.

If the washer is not installed between the nut and rear seat leg bracket LH:

Remove the nut and rear seat leg bracket LH.


Hide 3.REMOVE REAR SEAT CUSHION COVER LH

B276880
0.979,1.635 1.167,1.635 1.167,1.635 1.26,1.75 false 0.802,1.531 1.031,1.729 0.229,0.198 10 false *a
*a Washer installed between rear seat leg bracket LH and rear seat cushion cover LH


a.

If the washer is installed between the rear seat leg bracket LH and rear seat cushion cover LH:

Remove the washer and screw.


b.

If the washer is not installed between the rear seat leg bracket LH and rear seat cushion cover LH:

Remove the screw.


c.

Pull up the rear seat cushion cover LH to detach the guide and remove the rear seat cushion cover LH.


Hide 4.REMOVE REAR SEAT LEG BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 5.REMOVE REAR SEAT CUSHION COVER RH

HINT:

Use the same procedures described for the LH side.


Hide 6.REMOVE REAR SEAT HEADREST SUPPORT

a.
B276885

Detach the 8 claws and remove the 4 rear seat headrest supports.


Hide 7.REMOVE REAR SEATBACK ASSEMBLY

a.
B276881

Remove the 2 bolts and rear seatback assembly from the rear seat cushion assembly.


Hide 8.REMOVE NO. 1 SEATBACK COVER

a.
B276882

Remove the hog rings.


b.
B276887

Remove the hog rings and No. 1 seatback cover from the No. 1 seatback pad.


Hide 9.REMOVE NO. 1 SEATBACK PAD

NOTICE:

As the No. 1 seatback pad is affixed to the No. 1 seatback frame, do not remove the No. 1 seatback pad from the No. 1 seatback frame unless it is necessary to replace the No. 1 seatback pad. If the No. 1 seatback pad is removed from the No. 1 seatback frame, make sure to replace the No. 1 seatback pad.


a.
B276889

Remove the No. 1 seatback pad from the No. 1 seatback frame.


b.

If reusing the No. 1 seatback frame:

Remove any remaining pad and adhesive from the No. 1 seatback frame.


Hide 10.REMOVE REAR SEAT CUSHION

B277932

a.

Remove the 2 screws and 2 rear seat cushions.


Hide 11.REMOVE NO. 1 SEAT CUSHION COVER

B276891

a.

Remove the hog rings from the 2 wires of the No. 1 seat cushion cover.


b.
B276893

Open the 2 fasteners.


c.
B276894

Pull the fold seat stopper band assembly through the 2 holes of the No. 1 seat cushion cover.


d.
B276896

Remove the hog rings and No. 1 seat cushion cover from the rear seat cushion pad.


Hide 12.REMOVE NO. 1 SEAT CUSHION PAD

a.
B276898

Remove the No. 1 seat cushion pad from the No. 1 seat cushion frame.


Hide 13.REMOVE FOLD SEAT STOPPER BAND ASSEMBLY

B276900

a.

Move the fold seat stopper band as shown in the illustration.


b.
B276904

Using needle nose pliers, spread the connecting wire.


c.
B276902

Move the connecting wire and fold seat stopper band assembly as shown in the illustration.


d.
B276906
1.49,0.354 1.656,0.354 1.656,0.354 1.74,0.563 false 1.25,0.26 1.417,0.417 0.167,0.156 10 false *1
*1 No. 1 Seat Cushion Frame Lock Plate


Pull and disconnect the connecting wire from the No. 1 seat cushion frame lock plate.


e.
B277893

Remove the fold seat stopper band assembly from the connecting wire.