Wear protective gloves. Sharp areas on the parts may injure your hands.
1.INSTALL POWER SEAT MOTOR ASSEMBLY (for Reclining)
Temporarily install the power seat motor assembly (for Reclining) with the 3 bolts.
Install the reclining rod.
Attach the 6 claws to install the push nut to the reclining rod.
Using a 4 mm socket hexagon wrench, tighten the 3 bolts.
Attach the 8 hooks to install the seatback spring.
Connect the connector.
2.INSTALL RECLINING ADJUSTER INSIDE COVER LH
3.INSTALL RECLINING ADJUSTER INSIDE COVER LH
4.INSTALL NO. 1 SEATBACK CLOTH
5.INSTALL SEPARATE TYPE FRONT SEATBACK PAD
6.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
7.INSTALL FRONT SEAT INNER CUSHION SHIELD LH
8.INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
9.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
10.INSTALL RECLINING POWER SEAT SWITCH KNOB
11.INSTALL FRONT SEAT ASSEMBLY
12.INSPECT FRONT SEAT ASSEMBLY