Home › Vehicle Interior › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY(for Reclining)
RM1840EF _58 Vehicle Interior _009646 SEAT _0052721 FRONT POWER SEAT MOTOR ASSEMBLY(for Reclining) G

SEAT  FRONT POWER SEAT MOTOR ASSEMBLY(for Reclining)  INSPECTION  


PROCEDURE

Hide 1.INSPECT POWER SEAT MOTOR ASSEMBLY (for Reclining)

a.

Check the operation of the power seat motor assembly.

i.
B211339
2.792,2.115 2.344,2.948 2.344,2.948 1.969,2.948 true 1.729,2.844 1.979,3.104 0.25,0.26 10 false *1 1.208,0.479 1.49,0.667 0.281,0.188 10 false *a 1.698,0.188 2,0.365 0.302,0.177 10 false *b 0.969,3.344 1.396,3.635 0.427,0.292 10 false *c
*1 Motor Gear
*a Counterclockwise
*b Clockwise
*c Component without harness connected
(Power Seat Motor Assembly)


Apply battery voltage to the power seat motor assembly.


ii.

Check that the motor gear rotates smoothly as follows.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2
Battery negative (-) → 1
Motor gear rotates clockwise
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates counterclockwise


If the result is not as specified, replace the power seat motor assembly.