Home › Vehicle Interior › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY(for Slide)
RM1840EF _58 Vehicle Interior _009646 SEAT _0052722 FRONT POWER SEAT MOTOR ASSEMBLY(for Slide) G

SEAT  FRONT POWER SEAT MOTOR ASSEMBLY(for Slide)  INSPECTION  


PROCEDURE

Hide 1.INSPECT POWER SEAT MOTOR ASSEMBLY (for Slide)

a.

Check the operation of the power seat motor assembly.

i.
B211401
0.521,2.208 0.823,2.708 0.823,2.708 1.042,2.708 true 1.667,0.198 1.917,0.396 0.25,0.198 10 false *b 1.167,0.042 1.438,0.271 0.271,0.229 10 false *a 1.135,2.604 1.333,2.802 0.198,0.198 10 false *1 1.115,2.99 1.385,3.24 0.271,0.25 10 false *c
*1 Motor Gear
*a Counterclockwise
*b Clockwise
*c Component without harness connected
(Power Seat Motor Assembly)


Apply battery voltage to the power seat motor assembly.


ii.

Check that the motor gear rotates smoothly as follows.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates clockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor gear rotates counterclockwise


If the result is not as specified, replace the power seat motor assembly.