1.INSPECT POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)
Check the operation of the power seat motor assembly.
| *1 | Adjust Screw |
| *a | Counterclockwise |
| *b | Clockwise |
| *c | Component without harness connected
(Power Seat Motor Assembly) |
Apply battery voltage to the power seat motor assembly.
Check that the adjust screw rotates smoothly as follows.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Adjust screw rotates clockwise |
| Battery positive (+) → 2
Battery negative (-) → 1 |
Adjust screw rotates counterclockwise |
If the result is not as specified, replace the power seat motor assembly.