Home › Vehicle Interior › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY(for Rear Lifter) › 2011.10–2012.01
RM1840EF _58 Vehicle Interior _009646 SEAT _0052723 FRONT POWER SEAT MOTOR ASSEMBLY(for Rear Lifter) A

SEAT  FRONT POWER SEAT MOTOR ASSEMBLY(for Rear Lifter)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 3.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

Hide 4.REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

Hide 5.REMOVE FRONT POWER SEAT SWITCH LH

Hide 6.REMOVE FRONT SEAT INNER CUSHION SHIELD LH

Hide 9.REMOVE POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)

a.
B211395

Detach the 2 wire harness clamps.


b.

Detach the 4 clamps indicated by the arrows in the illustration and remove the seat cushion spring.


c.
B211396

Remove the 4 bolts and seat cushion frame.


d.
B211409

Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts for the tilt rod.


e.

Remove the nut and tilt rod.


f.
B211410
1.083,0.156 1.198,0.156 false 1.198,0.156 1.729,0.49 true 0.917,0.063 1.146,0.25 0.229,0.188 10 false *1
*1 Adjust Screw


Disconnect the connector.


g.

Using a T40 "TORX" socket wrench, remove the "TORX" bolt for the adjust screw.


h.

Using a 4 mm socket hexagon wrench, remove the 2 bolts and power seat motor assembly (for Rear Lifter).

HINT:

When the adjust screw is locked in the uppermost or lowermost position, turn the screw to release the lock before removing the power seat motor assembly.