Wear protective gloves. Sharp areas on the parts may injure your hands.
1.INSTALL BENCH TYPE REAR SEATBACK PAD
Install the bench type rear seatback pad to the rear seatback frame sub-assembly.
2.INSTALL BENCH TYPE REAR SEATBACK COVER
| *1 | Hog Ring Pliers |
Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with new hog rings.
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
3.INSTALL BENCH TYPE REAR SEAT CUSHION COVER LH (w/ Seat Cushion)
| *1 | Hog Ring Pliers |
Using hog ring pliers, install the bench type rear seat cushion cover to the rear seat cushion pad with new hog rings.
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
4.INSTALL BENCH TYPE REAR SEAT CUSHION COVER RH (w/ Seat Cushion)
Use the same procedures described for the LH side.