Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab) › 2012.01–2012.04
RM1840EF _58 Vehicle Interior _009647 SEAT BELT _0052735 FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab) A

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY

Hide 3.REMOVE FRONT DOOR OPENING TRIM LH

a.

Partially remove the front door opening trim LH so that the lower quarter trim panel LH can be removed (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Double Cab)>REMOVAL).


Hide 4.REMOVE LOWER QUARTER TRIM PANEL LH

a.
B284038

Remove the bolt and disconnect the seat outer belt floor anchor.


b.
B284039

Using a clip remover, detach the 3 clips and remove the lower quarter trim panel LH.


Hide 5.REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH

B282311
2.281,1.104 2.51,0.969 2.51,0.969 2.625,0.969 false 2.677,2.917 2.865,3.083 0.188,0.167 10 false *a 2.656,0.865 2.844,1.031 0.188,0.167 10 false *1
*1 Protective Tape
*a Open


a.

Remove the shoulder anchor.

i.

Using a screwdriver, detach the 2 claws and open the cover.

HINT:

Tape the screwdriver tip before use.



ii.

Remove the bolt and front seat outer belt shoulder anchor.



b.
B282312

Remove the bolt and front seat outer belt assembly LH.