Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY(for Double Cab) › from 2012.04
RM1840EF _58 Vehicle Interior _009647 SEAT BELT _0052736 REAR SEAT OUTER BELT ASSEMBLY(for Double Cab) A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for Double Cab)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 3.REMOVE REAR DOOR OPENING TRIM LH

a.

Partially remove the rear door opening trim LH so that the lower quarter trim panel LH can be removed (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Double Cab)>REMOVAL).


Hide 5.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

B282326

a.

Remove the bolt and rear seat outer belt floor anchor.


b.
B282311
2.281,1.104 2.51,0.969 2.51,0.969 2.625,0.969 false 2.677,2.917 2.865,3.083 0.188,0.167 10 false *a 2.656,0.865 2.844,1.031 0.188,0.167 10 false *1
*1 Protective Tape
*a Open


Using a screwdriver, detach the 2 claws and open the rear seat outer belt shoulder anchor cover.

HINT:

Tape the screwdriver tip before use.



c.

Remove the bolt.


d.
B282327

Remove the bolt and retractor of the rear seat outer belt assembly RH.