Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1KD-FTV, 2KD-FTV)
RM1840EF _58 Vehicle Interior _009648 HEATING / AIR CONDITIONING _0052748 COMPRESSOR(for 1KD-FTV, 2KD-FTV) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1KD-FTV, 2KD-FTV)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E171823

a.

Remove the screw and cooler bracket.


Hide 2.REMOVE MAGNET CLUTCH ASSEMBLY

E171824
1.635,2.823 2.406,2.823 false 1.375,2.719 1.573,2.917 0.198,0.198 10 false *1
*1 Battery


a.

Clamp the cooler compressor in a vise between aluminum plates.


b.

Connect the battery to the magnet clutch assembly as shown in the illustration to fix the hub and rotor in place.


c.

Wrap the drive belt around the rotor and securely hold it in place by hand.


d.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



e.
E155202

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



f.

Detach the connector clamp.


g.
E155203

Using a snap ring expander, remove the snap ring and magnet clutch stator.