1.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY (for Manual Air Conditioning System)
2.REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Detach the 3 claws and remove the air mix damper control cable sub-assembly.
3.REMOVE HEATER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Detach the 3 claws and remove the heater control cable sub-assembly.
4.REMOVE AIR MIX DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Remove the 3 screws and air mix damper servo sub-assembly.
5.REMOVE MODE DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
| *1 | Lever |
Detach the claw and remove the lever.
Remove the 3 screws and mode damper servo sub-assembly.
6.REMOVE BLOWER ASSEMBLY
7.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Remove the screw and heater radiator unit sub-assembly.
8.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the 4 screws.
Detach the 3 claws and remove the lower heater case.
Detach the clamp and remove the No. 1 cooler evaporator sub-assembly.
9.REMOVE COOLER EXPANSION VALVE
Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts.
Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.
10.REMOVE NO. 1 COOLER THERMISTOR