Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PRESSURE SENSOR › 2011.10–2012.01
RM1840EF _58 Vehicle Interior _009648 HEATING / AIR CONDITIONING _0052758 AIR CONDITIONING PRESSURE SENSOR A

HEATING / AIR CONDITIONING  AIR CONDITIONING PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 4.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH

Hide 5.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH

Hide 6.REMOVE FRONT BUMPER REINFORCEMENT EXTENSION LH

Hide 7.REMOVE FRONT BUMPER REINFORCEMENT EXTENSION RH

Hide 8.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Hide 9.REMOVE RADIATOR SIDE DEFLECTOR RH

E225445

a.

Remove the 3 clips and radiator side deflector RH.


Hide 10.REMOVE AIR CLEANER ASSEMBLY (for 1KD-FTV, 2KD-FTV)

Hide 11.REMOVE INTAKE AIR CONNECTOR AND AIR CLEANER ASSEMBLY (for TR Series Engine)

Hide 12.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.

Disconnect the connector.


b.

Remove the 3 bolts and air conditioning tube and accessory assembly (air conditioning pressure sensor).

E229029


c.

Remove the O-rings from the air conditioning tube and accessory assembly (air conditioning pressure sensor).

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.