Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM1840EF _58 Vehicle Interior _009648 HEATING / AIR CONDITIONING _0052761 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


PROCEDURE

Hide 4.INSTALL CLEAN AIR FILTER

a.

Install the clean air filter.


b.

Attach the claw to install the air filter case.


Hide 5.INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.

Attach the 3 claws to install the air inlet damper control cable sub-assembly.


Hide 6.INSTALL RECIRCULATION DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.

Install the recirculation damper servo sub-assembly with 3 screws.


b.

Attach the claw to install the recirculation damper servo sub-assembly.