Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1GR-FE) › from 2012.04
RM1840EF _58 Vehicle Interior _009648 HEATING / AIR CONDITIONING _0052766 COMPRESSOR(for 1GR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GR-FE)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E174572

a.

Remove the screw and cooler bracket.


Hide 2.REMOVE MAGNET CLUTCH ASSEMBLY

E174573
0.604,1.5 1.646,1.5 true 0.24,1.417 0.604,1.646 0.365,0.229 10 false SST

a.

Clamp the cooler compressor in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00260  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Detach the connector clamp.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.