1.REMOVE NO. 1 COOLER CONDENSER BRACKET
Use the same procedure for both No. 1 cooler condenser brackets.
Remove the 2 bolts and No. 1 cooler condenser bracket.
2.REMOVE NO. 2 COOLER CONDENSER BRACKET
Remove the 2 bolts and No. 2 cooler condenser bracket.
3.REMOVE NO. 3 COOLER CONDENSER BRACKET
Remove the 2 bolts and No. 3 cooler condenser bracket.
4.REMOVE COOLER DRYER
| *1 | Modulator |
Using a 14 mm straight hexagon wrench, remove the cap from the modulator.
Using pliers, remove the cooler dryer.