1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
2.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
3.REMOVE SWITCH BASE
4.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
| *1 | Protective Tape |
Using a screwdriver, detach the claw, and remove the No. 1 power outlet socket assembly.
Tape the screwdriver tip before use.
5.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Detach the 2 claws and remove the No. 1 power outlet socket cover.