A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
1.INSTALL CONSOLE BOX ASSEMBLY
| *1 | Screw |
| *2 | Bolt |
| *3 | Clip |
Install the console box with the 4 screws and 2 bolts.
Install the 2 clips.
2.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
Attach the 12 claws to install the upper console panel.
| *A | for 2WD | *B | for 4WD |
3.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)
Attach the 12 claws to install the upper console panel.
| *A | for 2WD | *B | for 4WD |
4.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
Attach the 4 claws to install the parking brake hole cover.
5.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
Install the shift lever knob and twist it in the direction indicated by the arrow.
6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
Install the shift lever knob and twist it in the direction indicated by the arrow.