Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX(w/ Console Box Lid)
RM1840EF _58 Vehicle Interior _009650 INTERIOR PANELS / TRIM _0052772 FRONT CONSOLE BOX(w/ Console Box Lid) A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX(w/ Console Box Lid)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission, for 4WD)

a.

Attach the 7 claws to install the shifting hole cover.


Hide 2.INSTALL CONSOLE BOX BEZEL (for Manual Transmission, for 2WD)

a.

Attach the 8 claws to install the console box bezel.


b.

Attach the 4 claws to install the shifting hole cover.


c.

Install the 4 screws.


Hide 3.INSTALL REAR NO. 2 BOX PANEL (w/o Cup Holder)

a.

Attach the 2 claws and 2 guides to install the rear No. 2 box panel.


b.

Install the 2 screws.


Hide 4.INSTALL REAR CONSOLE END PANE SUB-ASSEMBLY (w/ Cup Holder)

a.

Install the rear console end panel with the 4 screws.


Hide 5.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

a.

Install the console compartment door with the 2 screws.