1.REMOVE INSTRUMENT PANEL DOOR (w/o Front Passenger Airbag)
Remove the 2 screws <B>.
Detach the 8 claws and 2 guides and remove the instrument panel door.
2.REMOVE NO. 1 DEFROSTER NOZZLE OPENING PLATE (w/o Defroster)
Detach the 6 claws and remove the No. 1 defroster nozzle opening plate.
3.REMOVE NO. 2 DEFROSTER NOZZLE OPENING PLATE (w/o Defroster)
Use the same procedure described for the No. 1 defroster nozzle opening plate.
4.REMOVE METER MOUNTING BRACKET
Remove the screw <B> and meter mounting bracket.
5.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
Detach the 4 claws and remove the No. 2 instrument panel register.
6.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
Use the same procedure described for the No. 2 instrument panel register.
7.REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY
Use the same procedure for both instrument panel cup holders.
Remove the 3 screws <B> and instrument panel cup holder.
8.REMOVE NO. 4 INSTRUMENT PANEL CUSHION
Remove the No. 4 instrument panel cushion.
9.REMOVE NO. 3 INSTRUMENT PANEL CUSHION
Remove the No. 3 instrument panel cushion.
10.REMOVE NO. 2 INSTRUMENT PANEL CUSHION
Remove the No. 2 instrument panel cushion.
11.REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
12.REMOVE LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)
Detach the 2 claws and guide and remove the light control switch hole cover.
13.REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)