Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SWITCH(for Automatic Cooler System) › 2011.10–2012.01
RM1840EF _59 Vehicle Exterior _009651 WINDOW / GLASS _0052781 WINDOW DEFOGGER SWITCH(for Automatic Cooler System) A

WINDOW / GLASS  WINDOW DEFOGGER SWITCH(for Automatic Cooler System)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL NO. 1 COOLER WIRE

a.
B280828
0.552,1 0.281,1 true 2.646,0.333 2.521,0.333 false 2.646,1.417 2.531,1.417 false 0.104,0.906 0.281,1.063 0.177,0.156 10 false *1 2.354,0.219 2.521,0.396 0.167,0.177 10 false *2 2.365,1.302 2.531,1.479 0.167,0.177 10 false *2
*1 Air Conditioning Amplifier Assembly
*2 No. 1 Cooler Wire


Install the No. 1 cooler wire to the air conditioning amplifier assembly as shown in the illustration.


Hide 3.CONNECT NO. 1 COOLER WIRE

a.
B280829

Connect the No. 1 cooler wire as shown in the illustration.


Hide 5.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).