Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH(for Double Cab)
RM1840EF _59 Vehicle Exterior _009651 WINDOW / GLASS _0052784 REAR POWER WINDOW SWITCH(for Double Cab) G

WINDOW / GLASS  REAR POWER WINDOW SWITCH(for Double Cab)  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY

B280844
1.875,1 2.24,0.583 2.24,0.583 2.49,0.583 true 1.583,1 1.25,0.573 1.25,0.573 1.031,0.573 true 2.021,1.042 2.375,1.042 true 1.073,1.042 1.427,1.042 true 1.729,0.99 1.729,0.302 1.729,0.302 1.875,0.302 true 2.406,0.948 2.813,1.135 0.406,0.188 10 false SU 2.531,0.479 2.802,0.667 0.271,0.188 10 false U 1.906,0.208 2.177,0.396 0.271,0.188 10 false B 0.823,0.479 1.094,0.667 0.271,0.188 10 false SD 0.094,0.073 0.365,0.26 0.271,0.188 10 false *a 0.948,0.948 1.104,1.135 0.156,0.188 10 false D
*a Component without harness connected
(Rear Power Window Regulator Switch Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (D) - 4 (SD)
2 (U) - 3 (B)
up Below 1 Ω
5 (D) - 4 (SD)
2 (U) - 1 (SU)
off Below 1 Ω
5 (D) - 3 (B)
2 (U) - 1 (SU)
down Below 1 Ω


If the result is not as specified, replace the rear power window regulator switch assembly.