Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR(for Front Door)
RM1840EF _59 Vehicle Exterior _009651 WINDOW / GLASS _0052785 POWER WINDOW REGULATOR MOTOR(for Front Door) G

WINDOW / GLASS  POWER WINDOW REGULATOR MOTOR(for Front Door)  INSPECTION  


PROCEDURE

Hide 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

a.
B280842
1.146,1.052 1.427,0.188 1.427,0.188 1.625,0.188 true 2.833,1.01 2.833,0.625 2.833,0.625 3.073,0.625 true 2.438,1.01 2.438,0.625 2.438,0.625 2.188,0.625 true 1.677,0.083 1.979,0.26 0.302,0.177 10 false *1 2.563,0.281 2.75,0.469 0.188,0.188 10 false *a 2.063,0.542 2.229,0.729 0.167,0.188 10 false U 3.115,0.542 3.271,0.729 0.156,0.188 10 false D
*1 Motor Gear
*a Component without harness connected
(Power Window Regulator Motor Assembly LH)
V100135

Clockwise
V100136

Counterclockwise


Apply battery voltage to connector terminals 1 and 2.

NOTICE:

Do not apply battery voltage to any terminals except terminals 1 and 2.



b.

Check that the motor gear rotates smoothly as follows.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1 (D)
Battery negative (-) → 2 (U)
Motor gear rotates counterclockwise
Battery positive (+) → 2 (U)
Battery negative (-) → 1 (D)
Motor gear rotates clockwise


If the result is not as specified, replace the power window regulator motor assembly LH.



Hide 2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

a.
B280843
1.156,1.052 1.438,0.177 1.438,0.177 1.635,0.177 true 2.844,1.083 2.844,0.698 2.844,0.698 3.094,0.698 true 2.438,1.083 2.438,0.688 2.438,0.688 2.188,0.688 true 1.656,0.073 1.823,0.26 0.167,0.188 10 false *1 2.063,0.594 2.229,0.781 0.167,0.188 10 false U 3.125,0.604 3.281,0.792 0.156,0.188 10 false D 2.521,0.219 2.76,0.385 0.24,0.167 10 false *a
*1 Motor Gear
*a Component without harness connected
(Power Window Regulator Motor Assembly RH)
V100135

Clockwise
V100136

Counterclockwise


Apply battery voltage to connector terminals 1 and 2.

NOTICE:

Do not apply battery voltage to any terminals except terminals 1 and 2.



b.

Check that the motor gear rotates smoothly as follows.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1 (D)
Battery negative (-) → 2 (U)
Motor gear rotates clockwise
Battery positive (+) → 2 (U)
Battery negative (-) → 1 (D)
Motor gear rotates counterclockwise


If the result is not as specified, replace the power window regulator motor assembly RH.