Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)
RM1840EF _59 Vehicle Exterior _009651 WINDOW / GLASS _0052792 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) U

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  TERMINALS OF ECU  


CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Double Cab)


a.
B276285
1.417,0.104 1.948,0.396 0.531,0.292 1.604,0.167 1.917,0.344 0.313,0.177 10 false I12

Disconnect the I12 power window regulator master switch assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I12-6 (B) - Body ground L - Body ground Ignition power supply Ignition switch off Below 1 V
I12-6 (B) - Body ground L - Body ground Ignition power supply Ignition switch ON 11 to 14 V
I12-3 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the I12 power window regulator master switch assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I12-4 (U) - I12-3 (E) R - W-B Front power window regulator motor assembly LH up output Ignition switch ON, driver side power window switch off → up Below 1 V → 11 to 14 V
I12-9 (D) - I12-3 (E) L-R - W-B Front power window regulator motor assembly LH down output Ignition switch ON, driver side power window switch off → down (manual operation) Below 1 V → 11 to 14 V
Ignition switch ON, driver side power window fully closed → driver side power window switch down (auto operation) → driver side power window fully open Below 1 V → 11 to 14 V → Below 1 V
I12-18 (U) - I12-3 (E) R-L - W-B Front power window regulator motor assembly RH up output
·

Window lock switch off

·

Ignition switch ON, front passenger side power window remote manual switch off → up


Below 1 V → 11 to 14 V
I12-15 (D) - I12-3 (E) G-W - W-B Front power window regulator motor assembly RH down output
·

Window lock switch off

·

Ignition switch ON, front passenger side power window remote manual switch off → down


Below 1 V → 11 to 14 V
I12-12 (U) - I12-3 (E) R-Y - W-B Rear power window regulator motor assembly LH up output
·

Window lock switch off

·

Ignition switch ON, rear power window LH remote manual switch off → up


Below 1 V → 11 to 14 V
I12-13 (D) - I12-3 (E) G-Y - W-B Rear power window regulator motor assembly LH down output
·

Window lock switch off

·

Ignition switch ON, rear power window LH remote manual switch off → down


Below 1 V → 11 to 14 V
I12-10 (U) - I12-3 (E) R-B - W-B Rear power window regulator motor assembly RH up output
·

Window lock switch off

·

Ignition switch ON, rear power window RH remote manual switch off → up


Below 1 V → 11 to 14 V
I12-16 (D) - I12-3 (E) G-B - W-B Rear power window regulator motor assembly RH down output
·

Window lock switch off

·

Ignition switch ON, rear power window RH remote manual switch off → down


Below 1 V → 11 to 14 V

If the result is not as specified, the master switch may have a malfunction.



CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (except Double Cab)


a.
B290646
1.365,0.156 2.042,0.542 0.677,0.385 1.625,0.271 1.854,0.458 0.229,0.188 10 false I13

Disconnect the I13 power window regulator master switch assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I13-9 (B) - Body ground L - Body ground Ignition power supply Ignition switch off Below 1 V
I13-9 (B) - Body ground L - Body ground Ignition power supply Ignition switch ON 11 to 14 V
I13-1 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the I13 power window regulator master switch assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I13-3 (U) - I13-1 (E) R - W-B Front power window regulator motor assembly LH up output Ignition switch ON, driver side power window switch off → up Below 1 V → 11 to 14 V
I13-4 (D) - I13-1 (E) L-R - W-B Front power window regulator motor assembly LH down output Ignition switch ON, driver side power window switch off → down (manual operation) Below 1 V → 11 to 14 V
Ignition switch ON, driver side power window fully closed → driver side power window switch down (auto operation) → driver side power window fully open Below 1 V → 11 to 14 V → Below 1 V
I13-8 (U) - I13-1 (E) R-L - W-B Front power window regulator motor assembly RH up output
·

Window lock switch off

·

Ignition switch ON, front passenger side power window remote manual switch off → up


Below 1 V → 11 to 14 V
I13-10 (D) - I13-1 (E) G-W - W-B Front power window regulator motor assembly RH down output
·

Window lock switch off

·

Ignition switch ON, front passenger side power window remote manual switch off → down


Below 1 V → 11 to 14 V

If the result is not as specified, the master switch may have a malfunction.