Home › Vehicle Exterior › DOOR / HATCH › HOOD
RM1840EF _59 Vehicle Exterior _009652 DOOR / HATCH _0052797 HOOD A

DOOR / HATCH  HOOD  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE HOOD TO RADIATOR SUPPORT SEAL

a.
B277303

Detach the 6 clips and remove the hood to radiator support seal.

NOTICE:

If the clips are damaged, replace them with new clips.



Hide 2.REMOVE HOOD INSULATOR (w/ Hood Insulator)

a.
B277306
0.052,0.063 0.323,0.26 0.271,0.198 10 false *A 0.073,1.688 0.427,1.906 0.354,0.219 10 false *B
*A w/o Intercooler
*B w/ Intercooler


Remove the 15 clips and hood insulator.


Hide 3.REMOVE HOOD AIR INTAKE SEAL (w/ Intercooler)

a.
B277304

Remove the 18 clips and hood air intake seal.


Hide 4.REMOVE HOOD BULGE (w/ Intercooler)

a.
B277305

Remove the 10 nuts and hood bulge.


Hide 5.REMOVE NO. 1 HOOD BULGE PROTECTOR (w/ Intercooler)

a.
B278369

Remove the No. 1 hood bulge protector from the hood bulge.


Hide 6.REMOVE WASHER NOZZLE SUB-ASSEMBLY

Hide 7.REMOVE WASHER HOSE ASSEMBLY

a.
B342441
0.646,1.438 0.708,1.177 0.708,1.177 0.813,1.177 true 1.396,1.302 1.396,1.625 1.396,1.625 1.563,1.625 true 2.146,0.927 2.146,0.74 2.146,0.74 2,0.74 false 2.885,0.865 2.885,0.594 2.885,0.594 2.76,0.594 true 2.75,1.24 2.75,1.865 2.75,1.865 2.594,1.865 true 0.844,1.073 1.156,1.229 0.313,0.156 10 false *1 1.813,0.656 2.125,0.813 0.313,0.156 10 false *2 1.625,1.51 1.938,1.667 0.313,0.156 10 false *1 2.542,0.51 2.854,0.667 0.313,0.156 10 false *1 2.406,1.771 2.719,1.927 0.313,0.156 10 false *1
*1 Clamp
*2 Hanger


Detach the 4 clamps and disconnect the washer hose from the hanger.


Hide 8.REMOVE HOOD BUMPER CUSHION

HINT:

Use the same procedure for both hood bumper cushions.


a.
B283188

Remove the hood bumper cushion.