Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY
RM1840EF _59 Vehicle Exterior _009652 DOOR / HATCH _0052798 HOOD LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.
B277362
1.719,1.323 2.458,1.323 false 1.542,1.219 1.833,1.448 0.292,0.229 10 false *1
*1 String


Tie the string that was passed through the engine compartment to the end of the hood lock control cable as shown in the illustration.

HINT:

Use a length of string long enough to pass through the engine compartment.



b.

Pass the hood lock control cable through the vehicle body, and then attach the grommet and each clamp.


c.

Untie the string from the hood lock control cable.

B277366
6.5,1.5 6.448,1.5 6.448,1.5 6.385,1.323 false 4.719,1 4.635,1 4.635,1 4.542,1.26 false 4.875,1.625 4.938,1.625 4.938,1.625 5.021,1.479 false 3.313,1.167 3.406,1.167 3.406,1.167 3.552,1.24 false 1.177,5.531 1.115,5.531 1.115,5.531 1.052,5.354 true 2.26,6.26 2.198,6.26 2.198,6.26 2.115,6.135 true 2.917,6.74 3.052,6.74 3.052,6.74 3.104,6.646 true 6.531,1.396 6.75,1.573 0.219,0.177 10 false *1 4.75,0.896 4.969,1.073 0.219,0.177 10 false *1 3.146,1.094 3.406,1.292 0.26,0.198 10 false *1 1.198,5.417 1.458,5.615 0.26,0.198 10 false *1 2.292,6.167 2.531,6.354 0.24,0.188 10 false *1 2.76,6.625 3.042,6.802 0.281,0.177 10 false *1 4.708,1.531 4.927,1.708 0.219,0.177 10 false *2
*1 Hood Lock Control Cable *2 Grommet



Hide 2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Connect the hood lock control cable to the hood lock control lever.


b.

Attach the 3 claws to install the hood lock control lever.


Hide 3.INSTALL HOOD LOCK ASSEMBLY

a.

Connect the hood lock control cable to install the hood lock.


b.

Install the 3 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)