Home › Vehicle Exterior › DOOR / HATCH › TAIL GATE
RM1840EF _59 Vehicle Exterior _009652 DOOR / HATCH _0052801 TAIL GATE N

DOOR / HATCH  TAIL GATE  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT REAR BODY TAIL GATE ASSEMBLY (for A Deck)

a.

Check that the clearance measurements of areas A to D are within the standard ranges.

B276684
2.75,0.99 2.938,1.177 0.188,0.188 10 false A 4.531,0.99 4.719,1.188 0.188,0.198 10 false B 2.625,3.479 2.802,3.656 0.177,0.177 10 false C 4.667,3.49 4.854,3.688 0.188,0.198 10 false D

Standard:
Area Specified Condition Area Specified Condition
A (Reference) 5.8 mm (0.228 in.) B (Reference) 5.8 mm (0.228 in.)
C (Reference) 5.8 mm (0.228 in.) D (Reference) 5.8 mm (0.228 in.)



Hide 2.ADJUST REAR BODY TAIL GATE ASSEMBLY (for A Deck)

a.

Loosen the hinge bolts on the tail gate.


b.

Adjust the tail gate by moving it left and right so that the clearance measurements are within the specified ranges.


c.

Tighten the hinge bolts on the tail gate after the adjustment.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)

B276686


Hide 3.INSPECT REAR BODY TAIL GATE ASSEMBLY (for J Deck)

a.

Check that the clearance measurements of areas A to D are within the standard ranges.

B276685
2.542,1.104 2.75,1.292 0.208,0.188 10 false A 4.531,1.104 4.74,1.302 0.208,0.198 10 false B 4.708,3.427 4.927,3.604 0.219,0.177 10 false D 2.427,3.438 2.646,3.656 0.219,0.219 10 false C

Standard:
Area Specified Condition Area Specified Condition
A (Reference) 5.3 mm (0.209 in.) B (Reference) 5.3 mm (0.209 in.)
C (Reference) 5.8 mm (0.228 in.) D (Reference) 5.8 mm (0.228 in.)



Hide 4.ADJUST REAR BODY TAIL GATE ASSEMBLY (for J Deck)

a.

Loosen the hinge bolts on the tail gate.


b.

Adjust the tail gate by moving it left and right so that the clearance measurements are within the specified ranges.


c.

Tighten the hinge bolts on the tail gate after the adjustment.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)

B281156