Home › Vehicle Exterior › DOOR / HATCH › TAIL GATE
RM1840EF _59 Vehicle Exterior _009652 DOOR / HATCH _0052801 TAIL GATE A

DOOR / HATCH  TAIL GATE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BODY TAIL GATE ASSEMBLY

a.

Install the rear body tail gate with the 2 bolts.

Torque:
59 N*m (602 kgf*cm, 44 ft.*lbf)


b.

w/ Wire Harness:

i.

Pass the wire harness through the vehicle body.


ii.

Connect the connector and attach the 2 claws.



Hide 2.INSTALL TAIL GATE STAY ASSEMBLY

HINT:

Use the same procedure for both tail gate stays.


a.
B276659

Install the tail gate stay with the 2 screws.

Torque:
27 N*m (275 kgf*cm, 20 ft.*lbf)