Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH
2.REMOVE OUTER MIRROR LH
3.REMOVE OUTER MIRROR COVER LH
| *1 | Tape |
Remove the tape.
Remove the screw, detach the 5 claws and remove the rubber base.
It is not necessary to completely remove the rubber base. Slightly move the rubber base so that the outer mirror cover LH can be removed in a later step.
Using a T25 "TORX" socket wrench, remove the 3 screws.
Remove the 3 screws.
Detach the 6 claws.
Detach the 2 claws and remove the outer mirror cover LH as shown in the illustration.