Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR › 2011.10–2012.10
RM1840EF _59 Vehicle Exterior _009654 WIPER / WASHER _0052813 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE WASHER INLET SUB-ASSEMBLY

a.
B117862

Remove the clip.


b.

Pull the washer inlet of the washer jar and pump upward. Then remove it from the windshield washer jar and pump.


Hide 4.DRAIN WASHER FLUID

a.
E225953

Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.

HINT:

Use a container to collect the washer fluid.



Hide 5.REMOVE WINDSHIELD WASHER JAR ASSEMBLY

a.
E225505

Remove the grommet.


b.
E271375

Disconnect the connector and washer hose.


c.

Detach the 2 clamps and remove the 3 bolts. Then remove the washer jar and pump.


Hide 6.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
B117865

Pull out the washer motor and pump from the packing of the washer jar.