Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY
RM1840EF _59 Vehicle Exterior _009655 LIGHTING (EXT) _0052815 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL HEADLIGHT BRACKET LH

a.

Install the headlight bracket LH with the 1 or 2 screws.

HINT:
·

There are 1 or 2 screws depending on the date of manufacture.

·

When replacing the headlight unit, 1 screw is not used as the hole on the inner side is covered.




Hide 2.INSTALL CLEARANCE LIGHT BULB

a.

Install the clearance light bulb to the clearance light socket.


Hide 3.INSTALL CLEARANCE LIGHT SOCKET

a.
E225344

Turn the clearance light socket in the direction indicated by the arrow in the illustration to install the clearance light socket.


Hide 4.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the front turn signal light socket.


Hide 5.INSTALL FRONT TURN SIGNAL LIGHT SOCKET

a.
E225345

Turn the front turn signal light socket in the direction indicated by the arrow in the illustration to install the front turn signal light socket.


Hide 6.INSTALL NO. 1 HEADLIGHT BULB

a.
E225346

Install the No. 1 headlight bulb and set the lock of the set spring.


b.

Install the socket cover.