Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender)
RM1840EF _59 Vehicle Exterior _009655 LIGHTING (EXT) _0052817 SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender) A

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL SIDE TURN SIGNAL LIGHT LENS GASKET LH

a.

Wipe off any tape adhesive residue with cleaner.


b.

Using a heat light, heat a new side turn signal light lens gasket LH.

HINT:

When installing the side turn signal light lens gasket LH, heat the side turn signal light lens gasket LH with a heat light.


Standard:
Item Temperature
Side Turn Signal Light Lens Gasket LH 20 to 30°C (68 to 86°F)



c.

Remove the peeling paper from the face of the side turn signal light lens gasket LH.


d.

Install the a side turn signal light lens gasket LH.


Hide 2.INSTALL SIDE TURN SIGNAL LIGHT BULB

a.

Install the side turn signal light bulb to the side turn signal light socket and wire.


Hide 3.INSTALL SIDE TURN SIGNAL LIGHT SOCKET AND WIRE

a.
B113208

Turn the side turn signal light socket and wire in the direction indicated by the arrow in the illustration to install it.


Hide 4.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E226168
2.573,1.771 2.906,2.042 0.333,0.271 10 (1) 1.49,1.76 1.823,2.031 0.333,0.271 10 (2)

Connect the connector.


b.

Attach the 2 claws to install the side turn signal light assembly LH as shown in the illustration.