Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender)
RM1840EF _59 Vehicle Exterior _009655 LIGHTING (EXT) _0052817 SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender) A

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E225461
2.677,1.729 2.958,1.99 0.281,0.26 10 (1) 1.49,1.802 1.813,2.052 0.323,0.25 10 (2)

Detach the 2 claws and remove the side turn signal light assembly LH as shown in the illustration.


b.

Disconnect the connector.


Hide 2.REMOVE SIDE TURN SIGNAL LIGHT SOCKET AND WIRE

a.
E225462

Turn the side turn signal light socket and wire in the direction indicated by the arrow and pull it to remove the side turn signal light socket and wire.


Hide 3.REMOVE SIDE TURN SIGNAL LIGHT BULB

a.

Remove the side turn signal light bulb from the side turn signal light socket and wire.


Hide 4.REMOVE SIDE TURN SIGNAL LIGHT LENS GASKET LH

a.

Remove the side turn signal light lens gasket LH.