Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM1840EF _59 Vehicle Exterior _009655 LIGHTING (EXT) _0052819 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.

Attach the claw.


b.

Attach the guide to install the rear combination light socket and wire sub-assembly LH.


Hide 2.INSTALL BACK UP LIGHT BULB

a.
E225356

Install the back up light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.


Hide 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E225357

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.


Hide 4.INSTALL TAIL AND STOP LIGHT BULB

a.
E225358

Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.


Hide 5.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

a.

Connect the connector.


b.

Attach the 2 clips to install the rear combination light assembly LH.


c.

Install the 2 bolts to the rear combination light assembly LH.

Torque:
2.5 N*m (25 kgf*cm, 22 in.*lbf)