Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC LIGHT CONTROL SENSOR › from 2012.10
RM1840EF _59 Vehicle Exterior _009655 LIGHTING (EXT) _0052826 AUTOMATIC LIGHT CONTROL SENSOR A

LIGHTING (EXT)  AUTOMATIC LIGHT CONTROL SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE COMBINATION METER ASSEMBLY

Hide 2.REMOVE LIGHT CONTROL SWITCH HOLE COVER

a.
E229143

Disconnect the connector.


b.

Detach the 2 claws and guide underneath the upper instrument panel sub-assembly by hand, and remove the light control switch hole cover


Hide 3.REMOVE AUTOMATIC LIGHT CONTROL SENSOR

a.
E229142

Detach the 2 claws and remove the automatic light control sensor.