Home › Vehicle Exterior › HORN › HORN
RM1840EF _59 Vehicle Exterior _009656 HORN _0052828 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 1.INSPECT HIGH PITCHED HORN ASSEMBLY

B221681
2.542,1.354 2.594,1.688 2.594,1.688 2.677,1.688 false 2.698,1.594 3.031,1.823 0.333,0.229 10 *1
*1 Terminal 1


a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
High pitched horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 2.INSPECT LOW PITCHED HORN ASSEMBLY

B221681
2.542,1.354 2.594,1.688 2.594,1.688 2.677,1.688 false 2.698,1.594 3.031,1.823 0.333,0.229 10 *1
*1 Terminal 1


a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Low pitched horn sounds


If the result is not as specified, replace the low pitched horn assembly.