1.REMOVE FRONT BUMPER EXTENSION LH (w/ Outside Moulding)
Remove the 8 retainers and front bumper extension.
2.REMOVE FRONT BUMPER EXTENSION RH (w/ Outside Moulding)
Use the same procedure described for the LH side.
3.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
4.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
5.REMOVE FRONT BUMPER HOLE COVER LH
Detach the 3 claws and remove the front bumper hole cover.
6.REMOVE FRONT BUMPER HOLE COVER RH
Use the same procedure described for the LH side.
7.REMOVE NO. 1 LOWER RADIATOR GRILLE
Detach the 13 claws and remove the No. 1 lower radiator grille.