Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Flat Type)
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052832 REAR BUMPER(for Flat Type) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Flat Type)  DISASSEMBLY  


PROCEDURE

Hide 2.REMOVE REAR BUMPER ARM LH

a.
B277587

Remove the 2 bolts and rear bumper arm.


Hide 3.REMOVE REAR BUMPER ARM RH

HINT:

Use the same procedure described for the LH side.


Hide 4.REMOVE REAR BUMPER PLATE

a.
B277588

Detach the 13 claws and remove the rear bumper plate.


Hide 5.REMOVE REAR BUMPER PLATE LH

a.
B277589

Detach the 2 claws and remove the rear bumper plate.


Hide 6.REMOVE REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 7.REMOVE REAR BUMPER BAR PLATE

a.
B277590
0.563,0.479 0.833,0.479 0.833,0.479 1.042,1.01 true 1.531,0.24 1.802,0.24 1.802,0.24 2.01,0.76 true 0.365,0.385 0.583,0.552 0.219,0.167 10 false *1 1.333,0.146 1.552,0.313 0.219,0.167 10 false *1
*1 Double-sided Tape


Detach the 7 claws, and then remove the double-sided tape and rear bumper bar plate.