1.INSTALL NO. 2 TAIL GATE MARK
When installing the No. 2 tail gate mark, heat the vehicle body and No. 2 tail gate mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 2 Tail Gate Mark | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 2 tail gate mark excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *A | for A Deck |
| *B | for J Deck |
Install a new No. 2 tail gate mark.
Using a heat light, heat the vehicle body and a new No. 2 tail gate mark.
Remove the peeling paper from the face of the No. 2 tail gate mark.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 tail gate mark in the position shown in the illustration.
The values in the illustration are reference values.
Press the No. 2 tail gate mark firmly to install it.
2.INSTALL TAIL GATE MARK
When installing the tail gate mark, heat the vehicle body and tail gate mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Tail Gate Mark | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or tail gate mark excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new tail gate mark.
Using a heat light, heat the vehicle body and a new tail gate mark.
Remove the peeling paper from the face of the tail gate mark.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the tail gate mark in the position shown in the illustration.
The values in the illustration are reference values.
Press the tail gate mark firmly to install it.
3.INSTALL REAR NAME PLATE
When installing the rear name plate, heat the vehicle body and rear name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or rear name plate excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *A | for A Deck |
| *B | for J Deck |
Install a new rear name plate.
Using a heat light, heat the vehicle body and a new rear name plate.
Remove the peeling paper from the face of the rear name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the rear name plate in the position shown in the illustration.
The values in the illustration are reference values.
Press the rear name plate firmly to install it.
4.INSTALL BACK DOOR MARK (w/ Grade Mark)
When installing the back door mark, heat the vehicle body and back door mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Mark | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door mark excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new back door mark.
Using a heat light, heat the vehicle body and a new back door mark.
Remove the peeling paper from the face of the back door mark.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door mark as shown in the illustration.
Press the back door mark firmly to install it.
5.INSTALL FRONT DOOR NAME PLATE
When installing the front door name plate, heat the vehicle body and front door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or front door name plate excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *A | for LH Side |
| *B | for RH Side |
Install a new front door name plate.
Using a heat light, heat the vehicle body and a new front door name plate.
Remove the peeling paper from the face of the front door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the front door name plate in the position shown in the illustration.
The values in the illustration are reference values.
Press the front door name plate firmly to install it.
6.INSTALL NO. 1 FRONT DOOR NAME PLATE
When installing the No. 1 front door name plate, heat the vehicle body and No. 1 front door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Front Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 1 front door name plate excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 1 front door name plate.
Using a heat light, heat the vehicle body and a new No. 1 front door name plate.
Remove the peeling paper from the face of the No. 1 front door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 front door name plate in the position shown in the illustration.
The values in the illustration are reference values.
Press the No. 1 front door name plate firmly to install it.
| *A | for 1KD-FTV | *B | for 2TR-FBE |
7.INSTALL NO. 2 FRONT DOOR NAME PLATE
When installing the No. 2 front door name plate, heat the vehicle body and No. 2 front door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 2 Front Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 2 front door name plate excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 front door name plate.
Using a heat light, heat the vehicle body and a new No. 2 front door name plate.
Remove the peeling paper from the face of the No. 2 front door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 front door name plate in the position shown in the illustration.
The values in the illustration are reference values.
Press the No. 2 front door name plate firmly to install it.
| *A | for 1KD-FTV | *B | for 2TR-FBE |