Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR BELT MOULDING › 2012.04–2012.10
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052835 REAR DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR BELT MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL (w/ Power Window)

Hide 2.REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

Hide 4.REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

Hide 5.REMOVE REAR DOOR OUTER GLASS WEATHERSTRIP LH

a.
B278870
0.896,1.604 1.125,1.604 1.125,1.604 1.302,1.26 false 0.698,1.5 0.927,1.667 0.229,0.167 10 false *1
*1 Protective Tape


Put protective tape around the rear door outer glass weatherstrip.


b.

Detach the 4 claws and remove the rear door outer glass weatherstrip.