Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052836 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

a.

Attach the 3 claws to install the radiator grille (or front panel) emblem.


Hide 2.INSTALL RADIATOR GRILLE MOULDING

a.

Attach the 18 claws to install the radiator grille moulding.


b.

Install the 7 screws.


Hide 3.INSTALL NO. 1 RADIATOR GRILLE SEAL

HINT:

When installing the No. 1 radiator grille seal, heat the radiator grille using a heat light.


Standard:
Item Temperature
Radiator Grille 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the radiator grille excessively.


a.

Clean the radiator grille surface.

i.

Using a heat light, heat the radiator grille surface.


ii.

Remove the double-sided tape from the radiator grille surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new No. 1 radiator grille seal.

i.

Remove the peeling paper from the face of a new No. 1 radiator grille seal.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Attach the 13 clips to install the No. 1 radiator grille seal.