Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE STEP › 2011.10–2012.10
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052838 SIDE STEP A

EXTERIOR PANELS / TRIM  SIDE STEP  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL SIDE STEP SUB-ASSEMBLY LH

a.

for Double Cab:

Install the side step with the nut and 5 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

for Single Cab:

Install the side step with the nut and 3 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)