Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE MOULDING
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052839 SIDE MOULDING A

EXTERIOR PANELS / TRIM  SIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 3.REMOVE FRONT FENDER MUDGUARD LH (w/ Front Fender Mudguard)

Hide 4.REMOVE FRONT WHEEL OPENING EXTENSION LH

a.
B277555
1.01,0.177 1.135,0.177 1.135,0.177 1.229,0.375 false 0.813,0.083 1.052,0.292 0.24,0.208 10 false *1
*1 Protective Tape


w/o Front Fender Mudguard:

i.

Put protective tape around the front wheel opening extension.


ii.

Remove the 7 screws.



b.
B277556
0.827,0.075 0.997,0.246 0.17,0.17 10 *1 1.016,0.174 1.146,0.174 1.146,0.174 1.233,0.373 false
*1 Protective Tape


w/ Front Fender Mudguard:

i.

Put protective tape around the front wheel opening extension.


ii.

Remove the 4 screws.



c.
B277557

Detach the 8 clips and remove the front wheel opening extension.


d.

Remove the 8 clips from the vehicle body.


Hide 5.REMOVE REAR QUARTER PANEL MUDGUARD LH

Hide 6.REMOVE REAR NO. 1 WHEEL OPENING EXTENSION SUB-ASSEMBLY LH

a.
B277559
0.901,0.044 1.08,0.205 0.179,0.161 10 *1 1.102,0.136 1.331,0.136 1.331,0.136 1.388,0.312 false
*1 Protective Tape


Put protective tape around the rear No. 1 wheel opening extension.


b.

Remove the 5 screws.


c.
B277560

Detach the 11 clips and remove the No. 1 rear wheel opening extension.


d.

Remove the 11 clips from the vehicle body.